India–– BHOPAL: Fire incidents have declined considerably in forests of Madhya Pradesh due to implementation of information technology-based fire alert messaging system. Implemented in the year 2008 when the per case affected area was 8.35 hectare it has now come down to 3.61 hectare in the year 2012.
Giving this information, forest minister Sartaj Singh said that 2992 fire cases were reported in the year 2008 in which more than 22,000 hectare forest area was affected. Similarly, 9,988 hectare forest area was affected in 2765 fire cases in the year 2012.
In the absence of an effective monitoring apparatus at the headquarters, information about such fire incidents could not be received immediately. Even if information was received, it was given by residents of nearby villages or grazers, who were unable to give actual account of the incidents. As a result, fire used to consume massive proportions even before arrival of fire brigade, equipment etc at the site.
The Forest Department implemented forest alert messaging system in the year 2008 with a view to overcoming these challenges. Though the number of fire incidents was also less even before implementation of the system, but the affected area used to be large. This was due to absence of timely information which caused delay in dousing fire. Some cases in dense and interior sides of forests were even not registered.
Through forest fire alert messaging system, information about a fire incident is received immediately on the server installed at the headquarters. Following this, information was sought from officers at the headquarters about the latitude and longitude, area, forest circle number, beat, forest division etc. and sent through SMS to the field staff up to forester rank.
As a result, fire brigades rush to the spot and control fire immediately. Before implementation of this system, assessment of affected area was done by forester on the basis of estimate, but now accurate area is known. This helps in chalking out fire prevention schemes as well. When the Fourmile Canyon Fire erupted west of Boulder in 2010, smoke from the wildfire poured into parts of the city including a site housing scientists from the University of Colorado Boulder’s Cooperative Institute for Research in Environmental Sciences and the National Oceanic and Atmospheric Administration.
Read more at: http://phys.org/news/2012-08-evidence-heat-trapping-effects-wildfire-particles.html#jCpWithin 24 hours, a few researchers at the David Skaggs Research Center had opened up a particle sampling port on the roof of the building and started pulling in smoky air for analysis by two custom instruments inside. They became the first scientists to directly measure and quantify some unique heat-trapping effects of wildfire smoke particles.
Read more at: http://phys.org/news/2012-08-evidence-heat-trapping-effects-wildfire-particles.html#jCpWhen the Fourmile Canyon Fire erupted west of Boulder in 2010, smoke from the wildfire poured into parts of the city including a site housing scientists from the University of Colorado Boulder’s Cooperative Institute for Research in Environmental Sciences and the National Oceanic and Atmospheric Administration. Within 24 hours, a few researchers at the David Skaggs Research Center had opened up a particle sampling port on the roof of the building and started pulling in smoky air for analysis by two custom instruments inside. They became the first scientists to directly measure and quantify some unique heat-trapping effects of wildfire smoke particles. “For the first time we were able to measure these warming effects minute-by-minute as the fire progressed,” said CIRES scientist Dan Lack, lead author of the study published today in the Proceedings of the National Academy of Sciences. The researchers also were able to record a phenomenon called the “lensing effect,” in which oils from the fire coat the soot particles and create a lens that focuses more light onto the particles. This can change the “radiative balance” in an area, sometimes leading to greater warming of the air and cooling of the surface. While scientists had previously predicted such an effect and demonstrated it in laboratory experiments, the Boulder researchers were one of the first to directly measure the effect during an actual wildfire. Lack and his colleagues found that lensing increased the warming effect of soot by 50 to 70 percent. “When the fire erupted on Labor Day, so many researchers came in to work to turn on instruments and start sampling that we practically had traffic jams on the road into the lab,” Lack said. “I think we all realized that although this was an unfortunate event, it might be the best opportunity to collect some unique data. It turned out to be the best dataset, perfectly suited to the new instrument we had developed.” The instrument called a spectrophotometer can capture exquisite detail about all particles in the air, including characteristics that might affect the smoke particles’ tendency to absorb sunlight and warm their surroundings. While researchers know that overall, wildfire smoke can cause this lensing effect, the details have been difficult to quantify, in part because of sparse observations of particles from real-world fires. Once the researchers began studying the data they collected during the fire, it became obvious that the soot from the wildfire was different in several key ways from soot produced by other sourcesdiesel engines, for example. “When vegetation burns, it is not as efficient as a diesel engine, and that means some of the burning vegetation ends up as oils,” Lack said. In the smoke plume, the oils coated the soot particles and that microscopic sheen acted like a magnifying glass, focusing more light onto the soot particles and magnifying the warming of the surrounding air. The researchers also discovered that the oils coating the soot were brown, and that dark coloration allowed further absorption of light, and therefore further warming the atmosphere around the smoke plume. The additional warming effects mean greater heating of the atmosphere enveloped in dark smoke from a wildfire, and understanding that heating effect is important for understanding climate change, Lack said. The extra heating also can affect cloud formation, air turbulence, winds and even rainfall. The discovery was made possible by state-of-the-art instruments developed by CIRES, NOAA and other scientists, Lack said. The instruments can capture fine-scale details about particles sent airborne by the fire, including their composition, shape, size, color and ability to absorb and reflect sunlight of various wavelengths. “With such well-directed measurements, we can look at the warming effects of soot, the magnifying coating and the brown oils and see a much clearer, yet still smoky picture of the effect of forest fires on climate,” Lack said. CIRES is a cooperative institute of CU-Boulder and NOAA.